FAQ | Will the built-in power amp of my K/KW speaker power an external...
AnswerNo, there is no power amp output from a K/KW loudspeaker, however you can output your signal to another powered speaker or power amplifier to power a passive speaker.
View ArticleFAQ | Will there be a digital snake available for TouchMix-30 Pro?
AnswerNo digital snake is planned for the TouchMix-30 Pro.
View ArticleHow To | Play/Stop the Transport with a User Button on TouchMix.
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-RecordingUnder Selection Column-Touch TransportUnder Detail Column Touch Play/StopAssign User Button to any User Button 1-8Touch Assign...
View ArticleFAQ | What accessories are available for the CP Series?
AnswerBoth CP models will have a tote bag, outdoor weather cover, and yoke (U-bracket) mounts available.
View ArticleFAQ | What type of Speaker Pole Cup is on the KS212C Cardioid Sub?
AnswerThe KS212C Cardioid Sub actually features two M20 threaded Pole Cups – one on the top (for vertical orientation of the sub) and one on the side (for horizontal orientation of the sub). There is...
View ArticleFAQ | What loudspeakers does the 36" pole for the KW181 and KS118 support?
AnswerRefer to the KW181 and KS118 user manuals for pole-mounting instructions and limitations. The following are answers to questions we have received in the past. In all cases, you must consider the...
View ArticleFAQ | The LA108 has less specified amplifier Watts than a KLA12. Does that...
AnswerSpecified amplifier power (Watts) alone is not an indication of the maximum sound pressure level a loudspeaker is capable of producing. The KLA12 has a maximum SPL of131 dB, however the use of a...
View ArticleFAQ | Can a TouchMix mixer use Dante or AES67 for audio routing?
AnswerNo. The TouchMix-8, TouchMix-16, and TouchMix-30 Pro do not have the ability to use Dante or AES67 for network audio routing.
View ArticleTip | Corporate Rental and Production Application Guide.
AdviceThe TouchMix Application Guide for Event Production and Corporate AV features a wealth of information on Channel Presets, FX Mute, Wireless Control, and Multi-track Recording among other topics....
View ArticleFAQ | Can I use a 3rd party control system to control my TouchMix mixer?
AnswerNo. The TouchMix family of mixers do not have an API available for use with a 3rd party control systems like Crestron or AMX. Remote control functionality will solely be achieved by using the...
View ArticleFAQ | Can I use the LA108/LA112 in vertical orientation (enclosure placed on...
AnswerYes, the LA108/LA112 enclosures can also be deployed as a horizontal ground-stacked array when flipped onto their sides. Rubber feet located on the enclosure’s side ensure the endcaps are not...
View ArticleFAQ | Can I use the new KS212c Cardioid Sub with any K.2 model?
AnswerYes. In the crossover section, simply select 80Hz which is phase-optimized for the KS Series.
View ArticleFAQ | Can I use my KS118 and KW181 subwoofers together?
AnswerWhile the tonality of the KS118 and the KW181 may not quite match, you can use them deployed in the same setup. The feet receivers on the side of the KS118 are placed to also receive the feet of...
View ArticleFAQ | What is the operating ambient temperature range at which LA108/LA112...
AnswerThe operating ambient temperature range of L Class models is between 0° - 50°C (32° - 122°F). However at the upper end of the operating range, thermal limiting may engage resulting in reduced...
View ArticleFAQ | What is the crossover frequency between the subs and the tops?
AnswerAll of the K and KW loudspeakers will accept a full range signal. If you are using the KSub or KW181 there is a low pass filter set in the DSP at 100Hz. When the Ext. Sub switch on a K or KW top...
View ArticleFAQ | What are the sample rate and audio bit depth options for the TouchMix...
AnswerThe audio sample rate and bit depth specifications for TouchMix Series mixers are:24-bit AD/DA I/O converters32-bit floating point internal processing44.1 kHz or 48 kHz sample rate, switchable.
View ArticleHow To | Use a TouchMix User Button to get to any input Channel Directly....
ProcedureName Channel CEO or anything you need to get to fast, (Lead Singer, Guitar, KB etc.)Go to MenuGo to User ButtonsUnder Action Column Touch-SelectUnder Selection Column-Touch Input FaderUnder...
View ArticleHow To | Use CP12 Dance Contour (Output Preset) QSC.
ProcedureDance Contour TouchMix Output Preset for the CP12 powered Loudspeakers for Aux and Main Outputs. This Contour Preset emulates the DANCE setting on the CP-12 powered loudspeaker. Download the...
View ArticleFAQ | How many LA108/LA112 loudspeakers can I deploy on a loudspeaker stand?
AnswerA loudspeaker stand with a 45 kg (100 lb) safety rating can be used to deploy up to three (3) LA108 loudspeakers, or up to two (2) LA112 loudspeakers per stand. Always be sure to read and follow...
View ArticleFAQ | When should I use hard links in Q-SYS?
AnswerHard links only apply to Q-SYS Designer and the UCI Viewer app. If a Q-SYS Core processor cannot be discovered (for example, if the Core is on a remote network), you can specify the target IP...
View Article