FAQ | Why does my K.2 not show up in the updater screen?
AnswerUsing "Power Only" USB cables causes this issue. When updating K.2 series speakers, make sure you are using a Data or Data/Power USB-based cable.
View ArticleTroubleshooting | Dante audio stops after network switch power-cycle when...
Affected ProductsHardware Model/SeriesL Class Series Loudspeakers, LA108, LA112SoftwareDVSCProblemNo Dante audio after network switch has been power-cycled and using Dante Virtual Sound Card as the...
View ArticleTroubleshooting | K.2 Loudspeaker Does Not Pass Audio
ProblemUnit indicates it has power and is turned on (LED lights on, LCD display on) but no audio passes. Solution | WorkaroundVerify the following: The unit is turned on (Power LED and LCD display both...
View ArticleHow To | Arm ALL tracks at once to record on TouchMix.
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-RecordingUnder Selection Column-Touch Do for All TracksUnder Detail Column Touch Toggle ArmAssign User Button to any User Button 1-8Touch...
View ArticleHow To | Add the new Wideline 8 (WL-3082) voice into a Q-SYS design.
ProcedureIf your design already has a WideLine 8 voice in it, the file will stay the same as previously saved in versions prior to Q-SYS Designer Software 8.3. To take advantage of the new...
View ArticleFAQ | Can I daisy chain CP Series loudspeakers together?
AnswerYes. Simply plug your audio source into Channel A, B, or C on the first CP Series loudspeaker, and connect the Mix Out to the Channel A input of the next loudspeaker in the line. Repeat as...
View ArticleFAQ | Do I need two KS118 subwoofers for the cardioid configuration to work?
AnswerYes, this configuration requires at least two KS118 subwoofers.
View ArticleFAQ | Does the KS212C Cardioid Sub include a Speaker pole?
AnswerYes — a 26" length Speaker Pole is included (same as KSub).
View ArticleTip | DJ's and Mobile Entertainers K.2 Series Loudspeaker Application Guide.
AdviceThe QSC K.2 DJ/Mobile Entertainment Application Guide contains a wealth of recommendations, information, and instructions in regards to specific configurations and setups for DJ's and Mobile...
View ArticleFAQ | Can I use the the TouchMix automatic microphone mixer to mix my band?
AnswerAutomatic microphone mixers are intended primarily for speech applications such as panel discussions. They are also sometimes used in theatrical sound reinforcement. Automatic microphone mixers...
View ArticleFAQ | How does CP series performance compare to K or K.2?
AnswerQSC maintains very high standards for audio performance for all loudspeakers. This is equally true for CP series. That said, K and K.2 models are capable of producing greater acoustic output...
View ArticleFAQ | If there is no Dante® network redundancy on the LA108/LA112, what other...
AnswerFor mission-critical events (live broadcasts, etc.) it is possible to connect both Analog and Dante signals simultaneously where Dante audio is the primary source and the analog audio is the...
View ArticleFAQ | What is the range of the USB Wi-Fi Adapter included with the TouchMix-8...
AnswerApproximately 50 to 75 ft. (15 to 22 m) but range and connection reliability can be greatly reduced by obstructions, position of the devices and interference from other radio frequency energy.
View ArticleFAQ | How does the KS212C differ from the KW181?
AnswerThe current KW181 is a vented design with a direct radiating 18” woofer and a conventional coverage pattern. This design offers greater low frequency extension (i.e. it goes deeper), and is more...
View ArticleFAQ | Can any K.2, CP, KW, KLA, or K series loudspeakers be installed...
AnswerNo. None of these speakers are IP rated for fixed/permanent applications. Prolonged exposure to the elements can damage these units.
View ArticleHow To | Use the TouchMix User Buttons to set the Tap Tempo when using the...
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-Tap TempoUnder Selection Column-Touch Mono Delay, Stereo Delay L or Stereo Delay RUnder Detail Column Touch FX1-FX8Assign User Button to...
View ArticleTroubleshooting | "External Flash Data Invalid" Error - PLD/DPA/CXD Series...
Affected ProductsHardware Model/SeriesCXD/PLD/DPA Series AmplifiersSoftwareN/AProblem"External Flash Data Invalid" shows on LCD Display.CausesCould be the external flash date corruptedSolution |...
View ArticleFAQ | What is the difference between the KS118 and the KW181 subwoofers?
AnswerThere are actually many differences. The KS118 has the following:Nearly double the peak power with a 3600W Class D Amplifier (1800 W + 1800 W bridged)Custom-designed long excursion, tour-grade...
View ArticleFAQ | What are the installation options for CP Series loudspeakers?
AnswerYou can use the CP yoke or the speaker pole cup for installation.NoteThe CP series does not offer rigging points to fly the speakers.
View ArticleFAQ | Why is there no DEEP setting on the K.2 series of loudspeakers?
AnswerDEEP™ (Digital Extension and Excursion Processing) is now built into a number of Presets, including Dance, Live, Bass Amp and Studio Monitor. If the user feels there is too much bass present, it...
View Article