FAQ | What is the GXD amplifier input to output latency?
AnswerThe input to output latency of the GXD series amplifiers is 100us or 100 microseconds. This is fixed, regardless of processing used, unless delay is applied.
View ArticleHow To | Use the TouchMix User Buttons to get to any Input Channel (4) Band...
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-Go to ScreenUnder Selection Column-Touch Input EQUnder Detail Column Touch Channels 1-24 or Stereo in 25/26, 27/28, 29/30Assign User...
View ArticleFAQ | Can I change the font size on the TouchMix?
AnswerNo. This is due to screen sizing and achieving the best possible resolution for the graphics on the screen.
View ArticleTip | SIP softphone integration with Q-SYS.
AdviceThe Q-SYS Softphone SIP Integration Worksheet features a general overview, and planning steps IP address, proxy and subscriber information, and Voice Codec Support. In addition to the link, it...
View ArticleFAQ | Where can I find spare parts for my QSC gear?
AnswerSpare parts may be purchased through QSC's Authorized Service Partners, Dealers, Distributors, and at the QSC Spare Parts site (for US customers).NoteQSC does not sell spare parts to...
View ArticleUpdate | TouchMix-30 iOS App 3.0.22 Update Procedure
Important InformationThis is a guide to assist in the transition from TouchMix-30 Pro iOS App 3.0.19 to 3.0.22.RequirementsRecommended TouchMix-30 Pro Firmware: 3.0.12462Recommended iPad Device...
View ArticleQuick Tip | TouchMix User Button: Setting Faders to 0 dB or Unity Gain
Today's LessonLearn how to set up a User Button on the TouchMix to quickly bring your fader or faders to 0 dB or unity gain.This function comes in handy if you need to quickly reset a fader to Unity...
View ArticleTip | QSC's WL2082i (Installed Line Array) Series Loudspeakers Application...
AdviceThe WL2082i Application Guide features a wealth of information on the model lineup, wiring connections, system set up diagrams. In addition to the link below, it can also be found in the qsc.com...
View ArticleFAQ | Is the TouchMix automatic microphone mixer a “Dugan”?
AnswerNo. Only products manufactured or licensed by Dan Dugan Sound Design may use the name Dugan.
View ArticleFAQ | What are the sample rate and audio bit depth options for the TouchMix...
AnswerThe audio sample rate and bit depth specifications for TouchMix Series mixers are:24-bit AD/DA I/O converters32-bit floating point internal processing44.1 kHz or 48 kHz sample rate, switchable.
View ArticleFAQ | Can you enlist remote monitoring and management for fixed installations...
AnswerYes. In upcoming Q-SYS Designer Software select the L Class component from your Inventory and add it to the Schematic. This allows you to control and monitor each device. However, firmware...
View ArticleSound Advice | Loudspeaker placement part 6: Distributed loudspeakers
Today's LessonWhat do you do if you find yourself in a large venue or an outdoor venue, and your main PA loudspeakers just don’t seem to cover the full audience area adequately?The best solution here...
View ArticleFAQ | Can I plug my Hi-Z instrument (guitar/bass/etc.) directly into an input...
AnswerThe CP Series does not have a dedicated Hi-Z input function, so it is recommended to use a passive DI box for connecting those types of instruments to a CP Series input.
View ArticleFAQ | What is the coverage pattern of the LA108 and LA112?
AnswerThe LA108 has a coverage of 100° H x 15° V, while the LA112 features a 90° H x 15° V coverage, utilizing QSC Directivity Matched Transition® technology to match the horizontal coverage pattern at...
View ArticleFAQ | What happens to the warranty status if a QSC Audio product was not...
AnswerIf the product was not registered, the warranty defaults to the serial number and is based on the manufacture date.
View ArticleFAQ | What is the HI-Z selection on Input 2 for on the K.2 series of...
AnswerThe HI-Z (High Impedance) input is a 250 kΩ selection for passive instruments such as electric bass, acoustic guitar, mandolin, banjo, ukulele, etc.
View ArticleFAQ | The TouchMix DAW utility won’t export one or more of my tracks into the...
Answer You’re a Mac person, aren’t you? A likely cause is that a period was used in the name of the audio track that’s causing the problem. Let’s say you named a track “Vocals.Buffy”. The DAW utility...
View ArticleFAQ | Can I use any kind of microphone for the RTA functions on a Touchmix?
AnswerRTA stands for real time analyzer, which is an instrument for measuring and graphically representing the acoustical behavior of a sound system in a room or environment. This function is a...
View ArticleHow To | Change the PLD / CXD password from the front panel.
ProcedureNavigate to HOME> UTILITIES> PASSWORD and press ENTER.Enter the existing or default password. (The default password is "QSC".)Press ENTER> Cursor will turn Gray (Navigation).Press...
View ArticleFAQ | Where do I register my QSC gear?
AnswerTo register your QSC gear go to the link below, fill out the form, and you're all set!https://www.qsc.com/support/product-registration/
View Article