FAQ | How can I connect a computer to a KC12 system to install firmware updates?
AnswerA computer can be connected to the USB-C port on the rear panel. Please refer to the firmware update instructions available under www.qscaudio.com/kc12.
View ArticleFAQ | Can I send audio or data via the UCB-C port located on the KC12 rear...
AnswerNo, this port is used for firmware updates, and it does also provide adequate power to charge a smartphone or a tablet.
View ArticleFAQ | What is the coverage pattern of the KC12?
AnswerThanks to the innovative QSC LEAF™ (Length-Equalized Acoustic Flare) waveguide the KC12 system delivers a uniform coverage of 145° in the horizontal plane and 35° in the vertical place with...
View ArticleFAQ | Can I connect an additional, external active subwoofer to the KC12...
AnswerYes! There are two options:Option 1If your input signal is connected to the Input A of your KC12, you can simply connect your external subwoofer to the Output A which is a passive pass-through...
View ArticleFAQ | Can I position two KC12 loudspeakers next to each other to achieve...
AnswerDue to the very wide 145°horizontal coverage of the KC12 loudspeaker, placing two complete systems next to each other will result in serious comb filtering cancellations between the two KC12T...
View ArticleFAQ | What are the benefits of the QSC LEAF™ Waveguide on the KC12?
AnswerThe innovative QSC LEAF™ (Length-Equalized Acoustic Flare) waveguide provides defined, uniform coverage and exceptional throw allowing for consistent high-frequency reproduction, even in large...
View ArticleFAQ | Can I change the angle, or tilt the KC12T mid/HR unit?
AnswerNo the KC12T Mid/HF unit is set at a fixed angle providing an overall vertical coverage of 35° (+7.5° and-27.5°). However, if you need to set the coverage area closer to the loudspeaker, you can...
View ArticleFAQ | Can I connect signal sources to all three KC12 loudspeaker inputs at...
AnswerYes! Not only can you connect multiple sources at once, but each input also features dedicated Factory Presets allowing you to shape the sound independently on each input to achieve the best...
View ArticleFAQ | Can I use the KC12 loudspeaker in applications where it may be exposed...
AnswerNo, the KC12 loudspeaker is not rated for use in wet weather environments.
View ArticleFAQ | What is the best way to carry the KC12S subwoofer?
AnswerThe KC12S subwoofer features a large handle on the enclosure top and two grips on the bottom, allowing you to easily carry the enclosure with both hands for safe transportation.
View ArticleFAQ | How do I know that my KC12 system is performing at its limit and that...
AnswerFirst, each input features a “clip” LED light (labelled SIG/CLIP) that will indicate if the signal(s) going into the KC12 system is clipping, which can potentially cause damage to the amplifier...
View ArticleFAQ | How many KC12 loudspeakers can I daisy-chain using the Mix Output?
AnswerThere is no limit to the number of KC12 units that can be daisy-chained using Mix Outputs.
View ArticleFAQ | What is the operating ambient temperature range at which the KC12...
AnswerThe KC12 system operating ambient temperature ranges between 0° and 50°C (32° to 122°F). However, at the upper end of the operating range, thermal limiting may engage resulting in reduced sound...
View ArticleFAQ | Does QSC have a laptop version of the TouchMix-30 Control App?
AnswerNo, however some TouchMix-30 users have had success with app emulators on their computers.NoteQSC has not tested or verified this use case.
View ArticleFAQ | Can I stream audio via Bluetooth to more than one KC12 loudspeaker at a...
AnswerYes! Each KC12 system supports connections up to four (4) loudspeakers via Bluetooth linking and supports running them as Left, Right, or Mono loudspeakers.
View ArticleClik here to view.
FAQ | How does the KC12T Mid/HF unit work?
AnswerThe groundbreaking design of the KC12T Mid/HF enclosure features a 1-inch compression driver combined with the innovative QSC LEAF™ waveguide, as well as two high-excursion 4-inch midrange...
View ArticleFAQ | Is it safe to disassemble the column pole (KC-SP32) and the KC12T...
AnswerQSC recommends to systematically turn off the power on the KC12 loudspeaker system before assembling or disassembling it. However, if the KC12 loudspeaker system happens to be...
View Article