FAQ | Can I hook up an external word clock to the TouchMix-30?
AnswerAt this time, there is no clock sync connection that can use a third-party word clock device (e.g., Apogee Big Ben, Antelope Audio, Black Lion).
View ArticleFAQ | What is "Solo in Place" & how is it used on my TouchMix-30 Pro?
AnswerSolo In Place (SIP) is a handy function for system set up. SIP mutes all the mixer inputs except the input (or inputs) that is (or are) soloed. The "Solo In Place" part means that the channel is...
View ArticleHow To | Use iRig for TouchMix live streaming.
ProcedureThe iRig is a powerful tool for streaming audio from the TouchMix 8/16 into a computer or a cell phone. There are two connection types from the mixer:Mono FeedThrough one mono output of the...
View ArticleHow To | Using TouchMix 30 with conferencing software in Windows
ProcedureTouchMix 30 can be used with conferencing software such as Skype and Teams.Use the following steps to use TouchMix 30 with conferencing software in Windows:In your conferencing software,...
View ArticleFAQ | Can I rename channels on the TouchMix?
AnswerYes, all channels, auxes, and DCA groups on the TouchMix can be named and renamed as needed.
View ArticleHow To | Playback ALL tracks at once on the TouchMix.
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-RecordingUnder Selection Column-Touch Do for All TracksUnder Detail Column Touch Toggle Mic/TrackAssign User Button to any User Button...
View ArticleTip | Recommended DSP settings for the QSC E Series loudspeakers.
AdviceThe E Series Tunings tech note contains a wealth of information in regards to the recommended DSP settings of each E Series loudspeaker. In addition to the link, it can also be found in the...
View ArticleFAQ | How many pole cups does the CP Series have?
AnswerThe CP Series will have a single zero degree pole cup is located on the bottom of the loudspeaker.
View ArticleFAQ | Why did you replace the single rotating Tilt-Direct pole-cup with a...
AnswerWhile the rotating Tilt-Direct™ pole-cup was certainly innovative at the time, it did have one minor flaw: using the -7.5 degree down angle actually shifted the weight of the loudspeaker away...
View ArticleFAQ | What kind of microphone should I use when I use the TouchMix Room...
AnswerMany vocal microphones have a rise in their high-frequency response. For example, an SM58 has a frequency response that rises up to 5 dB between 2 kHz and 10 kHz. If these microphones are used...
View ArticleHow To | Import tracks to Garage Band.
ProcedureYou will need to convert your files to 24bit. The TouchMix mixer records at 32 bit and Garage Band will not accept 32 bit files.
View ArticleHow To | Stop the transport with a User Button on the TouchMix.
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-RecordingUnder Selection Column-Touch TransportUnder Detail Column Touch StopAssign User Button to any User Button 1-8Touch Assign...
View ArticleFAQ | How many effects does the TouchMix have?
AnswerFour instances of the six processors (two reverbs, stereo and mono delays, pitch shifter, chorus) are available and may be used in any combination. There are four dedicated effects buses, so it's...
View ArticleFAQ | What kind of automatic microphone mixer is the TouchMix automatic mixer?
AnswerThe TouchMix automatic microphone mixer is a gain-sharing design. This means that it is continuously comparing the levels of all the assigned channels with the level of each individual channel...
View ArticleClik here to view.
How To | Insert a KLA181 into Ease Focus
ProcedureThere is not an Ease file available for the KLA181. There is, however, a workaround: Add a KLA12 to the inventory.Under Object Properties, change setup to "KLA AF12 to KLA181-Rear Pull Back"...
View ArticleFAQ: Can TouchMix series mixers integrate directly with Q-SYS?
No. Other than analog audio connections, direct control of a TouchMix mixer from Q-SYS (and vice versa) is not possible.
View ArticleFAQ | Can I send audio from my wireless device to my Touchmix thru the Wi-Fi...
AnswerNo, the Wi-Fi dongle is used only for control of the Touchmix unit.
View ArticleFAQ | Why is there no USB Wi-Fi Adapter supplied with the TouchMix-30 Pro?
AnswerThe TouchMix-30 Pro is more likely to be used in applications where distances are greater and where there is more potential for other radio frequency interference. For these applications, an...
View ArticleFAQ | After setting up my loudspeaker array, how do I apply the correct Ar-Q™...
AnswerThe user may apply Ar-Q™ Array Equalization filters by selecting “Optimize Array” via the Rear User Interface (RUI) located on the rear panel of the LA108/LA112 loudspeakers. Simply press and...
View ArticleFAQ | What external media can the TouchMix record to?
AnswerYou can record to an external powered HDD (7200 rpm min) or SSD (minimum write speed of 150mbps) for multi-track recording, or to a USB 3.0 memory stick for stereo recording. For more information...
View Article