FAQ | Who should I contact for more information about the warranty of my QSC...
AnswerFor additional information, please contact your regional customer care or sales representative.
View ArticleFAQ | Do TouchMix Series Mixers support exFAT formatted media?
AnswerNo. TouchMix Series Mixers only support FAT32 formatted media for recording.
View ArticleFAQ | How many wireless devices can be connected to the mixer at one time?
AnswerUp to twelve devices may be connected to a TouchMix at one time.
View ArticleFAQ | How do I know if my iPad or iPhone is compatible with iOS17?
AnswerHere is a list of compatible iPhones:https://support.apple.com/guide/iphone/models-compatible-with-ios-17-iphe3fa5df43/iosHere is a list of compatible iPads:...
View ArticleTip | Rental/Production Market Using K.2 Series Loudspeakers Application Guide.
AdviceThe QSC K.2 Rental/Production Application Guide contains a wealth of recommendations, information, and instructions in regards to specific configurations and setups for use in the...
View ArticleFAQ | What do I need to know to connect my TouchMix to an existing network in...
AnswerIf the network has been set up by IT professionals, they may be reluctant to allow it. But if they do, they will want to know two things.What port do you want them to give you?Answer: Any open...
View ArticleFAQ | What is the paint specification for KW Series speakers?
AnswerUse these specifications for paint touch-ups:Binder Type: Water-acrylicGloss Level: Half MattColor: Graphite Black (RAL 9011)
View ArticleFAQ | Is the second EtherCON port on LA108/LA112 for network redundancy...
AnswerNo. The second EtherCON port is a parallel switched port that allows for daisy-chaining boxes.
View ArticleFAQ | Can I connect to my L Class loudspeaker array with an analog cable and...
AnswerNo. The ethernet ports on L Class models do not include a Dante® transmitter.
View ArticleFAQ | Can I use the LA108/LA112 in vertical orientation (enclosure placed on...
AnswerYes, the LA108/LA112 enclosures can also be deployed as a horizontal ground-stacked array when flipped onto their sides. Rubber feet located on the enclosure’s side ensure the endcaps are not...
View ArticleSound Advice | How to avoid comb filtering part 2: What is comb filtering?
Today's LessonWhat is comb filtering?Comb filtering occurs when certain frequencies are either amplified or attenuated within 10 dB of each other by interference from an identical version of the...
View ArticleSound Advice | How to set up mono in-ear mix
Today's LessonToday we'll discuss how to set up a mono in-ear mix on a TouchMix mixer.Choose an aux mix and make sure to label it. Make sure your mix is set to “pre fader.”Plug an XLR in the aux output...
View ArticleFAQ | Will the K.2 series of loudspeakers work with instruments that have...
AnswerYes. The K.2 series of loudspeakers is designed to work with instruments with either passive or active pick-ups.
View ArticleSound Advice | Loudspeaker placement part 5: Reflective surfaces
Today's LessonAcoustically reflective surfaces are any such surface that sound waves physically bounce off of when they come in contact with them, which can create some acoustic challenges in a live...
View ArticleSound Advice | Unbalanced cables
Today's LessonLet’s talk about balanced and unbalanced cables. What does this mean and what’s the difference?We'll start with unbalanced cables. An unbalanced cable consists of 2 wires. One wire...
View ArticleFAQ | Where can I find compliance information for the K.2 Series Loudspeakers?
AnswerCompliance documents for the K.2 Series Loudspeakers can be found on the product pages below:K8.2K10.2K12.2
View ArticleFAQ | What are the Dante®/Network EtherCON ports for on the LA108/LA112?
AnswerThe dual EtherCON ports can be connected to a local area network (LAN), over which remote control and monitoring of the loudspeaker(s) is available via the local area network using the QSC...
View ArticleFAQ | Can I use a 3rd party control system to control my TouchMix mixer?
AnswerNo. The TouchMix family of mixers do not have an API available for use with a 3rd party control systems like Crestron or AMX. Remote control functionality will solely be achieved by using the...
View ArticleHow To | Stop the transport with a User Button on the TouchMix.
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-RecordingUnder Selection Column-Touch TransportUnder Detail Column Touch StopAssign User Button to any User Button 1-8Touch Assign...
View Article