FAQ | Can I adjust the contrast on the rear LCD display in different light...
AnswerYes. The contrast can be adjusted from the SETTINGS menu.
View ArticleFAQ | The Stereo Inputs 29/30 on the TouchMix-30 Pro appear on both the front...
AnswerThe rear panel inputs are balanced and intended to receive line-level signal from devices such as professional video gear or another mixer. The front panel jack is intended for use with the...
View ArticleClik here to view.
How To | Install TWS-IO Temporary Weather Shields
The Temporary Weather Shield protecting Input/Output connectors (TWS-IO) is intended to provide moisture protection for L Class LA108 and LA112 loudspeaker Network and Line cable connections. The kit...
View ArticleFAQ | What is Ar-Q™ Array Equalization?
AnswerAs the size and total vertical coverage of an array is altered, the resulting change in low frequency (LF) energy output is not the same as the change in high-frequency (HF) output. In order to...
View ArticleFAQ | What does the Limit LED on the CP Series loudspeakers indicate?
AnswerThe Limit LED flickering on and off with dynamic peaks in the music is normal operation. If the LED is lit continuously, the loudspeaker is protecting itself from excessive level and there may be...
View ArticleFAQ | Can I still defeat the Front Power LED on the KS118?
AnswerYes. Similar to the KW181, the front LED can be defeated in the SETTINGS menu.
View ArticleHow To | Copying TouchMix channel settings to different scenes
ProcedureUse the following steps for copying TouchMix channel settings to different scenes:Copy and Paste is context sensitive so that what you are looking at is what will be copied. Only like things...
View ArticleFAQ | Can I parallel signal GX series amplifiers?
AnswerYes. These amplifiers have a balanced 1/4 inch jack (next to the XLR) on each channel. These are full range pass-through.
View ArticleFAQ | Can you paint E Series loudspeakers?
AnswerYes, the cabinet and grille of E Series loudspeaker can be painted.NoteThe grille foam will need to be removed or covered before paining. QSC does not sell the foam insert separate from the...
View ArticleHow To | Monitor both QLAN and Dante networks from the same computer.
ProcedureThis can be done using a large Level 3 switch with three VLANs set up on it. An example would be Cisco CAT3560X or CAT3750X with IP services feature set.Set up the VLANs this way: VLAN 1 for...
View ArticleFAQ | What is the power rating of the KS212C Cardioid Sub?
AnswerAs a member of the K Family, it features a 3600 Watt peak power module.
View ArticleFAQ | Where do I get my QSC gear repaired?
AnswerQSC offers two options for product repair:Drop off your product at a QSC Authorized Service Center near you.Ship your product to QSC for Factory Service. You may request a Return Merchandise...
View ArticleFactory Reset | TouchMix Digital Mixers
ProcedureUse the following steps to reset a TouchMix Digital Mixer to its factory default settings:Part 1 - Mixer SettingsNoteThis procedure will set the mixer back to factory defaults WITHOUT clearing...
View ArticleSound Advice | How to run a smooth soundcheck with TouchMix
Today's LessonHere's how to run a smooth sound check on a TouchMix at a multi-artist event.Use the feedback wizard to ring out the monitors before the band arrive.Use Channel presets to instantly dial...
View ArticleTip | QSC's Acoustic Performance Series Loudspeakers Application Guide.
AdviceThe Acoustic Performance Series Loudspeakers Application Guide features a wealth of information on the model lineup, wiring connections, system set up diagrams. In addition to the link below, it...
View ArticleFAQ | How many wireless devices can be connected to the mixer at one time?
AnswerUp to twelve devices may be connected to a TouchMix at one time.
View ArticleFAQ | How many amps can be seen in Amp Navigator?
AnswerYou can access up to 20 PLD or CXD series amplifiers in Amp Navigator.
View ArticleFAQ | Is my KW181 transport cover compatible with my KS118?
AnswerThe KS118 has its own transport cover (KS118-CVR). A KW181 transport cover may fit the KS118, but the openings to access the handles will not line up correctly.
View ArticleFAQ | Can I daisy chain CP Series loudspeakers together?
AnswerYes. Simply plug your audio source into Channel A, B, or C on the first CP Series loudspeaker, and connect the Mix Out to the Channel A input of the next loudspeaker in the line. Repeat as...
View ArticleTip | TouchMix Application Guide for Musicians and Bands.
AdviceThe TouchMix Application Guide for Musicians and Bands features information on Channel Presets, FX Mute, Wireless Control, and Multi-track Recording among other topics. In addition to the link...
View Article