How To | Use the TouchMix User Buttons to force highlighted Fader or Knob to...
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-UtilityUnder Selection Column-Touch Selected ParameterUnder Detail Column Touch Fader to 0 dbAssign User Button to any User Button...
View ArticleHow To | Use an EXTERNAL CROSSOVER with the K and KW Series Speakers.
ProcedureExplanationK and KW > EXT SUB > 100Hz High-Pass Filter > Filter is TOO HIGH > Using an External Cross OverThe High-Pass (HP) Filter on the K and KW is set to 100 Hz. This is...
View ArticleFAQ | Can a TouchMix mixer use Dante or AES67 for audio routing?
No, the TouchMix-8, TouchMix-16, and TouchMix-30 Pro do not have the ability to use Dante or AES67 for network audio routing.
View ArticleHow To | View MAC addresses with Wi-Fi dongle on TouchMix 8 or 16.
ProcedureEquipment Required: TM-8 / TM-16 / TM-30 WindStar Wi-Fi Dongle Wi-Fi Router with admin rights Visible DHCP client list Computer with network access to the Wi-Fi router Connect the mixer to an...
View ArticleFAQ | Are the E Series loudspeakers IP rated?
AnswerThe E Series loudspeakers are intended for use in portable/mobile systems and controlled environment installs (I.E. bars, clubs..etc). While these do have treated speakers, the enclosures are not...
View ArticleFAQ | What are the angles of the dual loudspeaker pole cup available on the...
AnswerThere are two pole cups on each loudspeaker. One will provide a 0° angle (baffle perpendicular to the ground). The other offers a (minus) -7.5° deployment for down-tilt firing.
View ArticleFAQ | Does the KS212C Cardioid Sub include Casters?
AnswerYes. Four 3.0" (76 mm) ball-bearing casters are pre-fitted to the rear.
View ArticleFAQ | Why do the LA108/LA112 feature only three adjustable vertical splay...
AnswerTypical applications for L Class loudspeakers were defined to include deployment of arrays containing up to six (6) loudspeakers. Extensive calculations and simulations of array sizes and venues...
View ArticleFAQ | When should I use the KLA Array Frame?
AnswerThe KLA Array Frame is designed for use when a system containing any combination of KLA12 or KLA181 speakers is deployed in a temporary fashion. By temporary, we mean an application where the...
View ArticleFAQ | Can I run my GX amplifier in bridged-mono?
AnswerNo, the GX series does not have 2-Ohm or Bridged-Mono capability as part of their design to be a more cost-effective amplifier. If you require a Bridged-Mono amplifier, try the RMX or PLX series...
View ArticleFAQ | Can the K, KW, KS, and K.2 power cables work interchangeably?
AnswerYes, the power cables for the K, KW, KS, and K.2 use the same Volex connector, as well as the same AWG. This means that they can be used with any unit. The lengths may vary.
View ArticleHow To | Format LaCie 500GB hard drive for use with TouchMix mixer.
ProcedureWhile this drive is included on our qualified drives list for use with the TouchMix series, it requires a unique process for properly formatting it to FAT32. This particular drive comes with a...
View ArticleClik here to view.
How To | Replace KS118 Low Frequency Transducer
ProcedureIf determined necessary, use this document as a guide for replacing the Low Frequency (LF) Transducer on the KS118.ToolsManual Screwdriver or Electric Screwdriver with Philips bitPutty...
View ArticleFAQ | Why is there no boost on the 4-band user EQ on the K.2 series of...
AnswerIt is a best practice among sound professionals to handle loudspeaker equalization by cutting frequencies that are excessive rather than by boosting frequencies that are considered as lacking....
View ArticleFAQ | How many L Class models can I connect via switch hops on a single...
AnswerIn the AV industry, there are two common methods of connecting network devices. The first method is a star topology where each device has its own port on an Ethernet switch. This is the most...
View ArticleFAQ | TouchMix-30 | My iOS device will not update to iOS17, can I still use...
AnswerYes. You can use older devices with the newest Touchmix-30 Pro App. However, Touchmix-30 Pro Control App version 3.0.22 was built for best compatibility with iOS17 or later. With this in mind, if...
View ArticleHow To | Connect the eight wall plates with just two jacks on the MP-M Mixer.
ProcedureThere are two ports on the back of the MP-M mixers that can support up to four MFC controllers daisy chained with up to 250m of total cable length per connection.
View ArticleHow To | Use the TouchMix User Buttons to get to the Main or Aux 1/3 Octave...
ProcedureGo to MenuGo to User ButtonsUnder Action Column Touch-Go to ScreenUnder Selection Column-Touch Output EQUnder Detail Column Touch Main (L/R) or Any Aux 1-14Assign User Button to any User...
View ArticleFAQ | When I use the TouchMix automatic microphone mixer, how does it change...
AnswerThe automatic microphone mixer has no effect on signal routing. Wherever you were sending your signal before you assigned a channel to the automatic microphone mixer is where it will go afterwards.
View ArticleFAQ | What Wi-Fi router should I use with TouchMix?
AnswerWe have successfully used a wide range of external Wi-Fi routers. Even inexpensive devices ($40 USD) have worked well. Most problems reported to QSC are the result of non-standard, custom...
View Article